make silicone prosthesis liquid silicone rubber HL-9610 platinum cure silicon raw material

Description:

Life casting liquid silicone rubber as a two-component heating vulcanization silicone rubber, part A and part B, the mixing ratio by weight or volume is 1:1 or 9:1, mainly be suitable for making molds and high quality silicone products application, through the FDA ,ROHS, SGS, LFGB testing, can cure at room temperature or fast cure dozens of minutes under heating reach 80-120 centigrade. silicone color, hardness, pot life, cure time all can customized according your need.

Parameter：

NOTE: all above silicone color, mix ratio, cured hardness, work time, cure time, packing size etc all can customize according clients requests.

Application:
1.With no deformation, high temperature resistant, resistant to acid and alkali, and no expansion characteristics
2.Low shrinkage ratio, less than 0.1% shrinkage
3.Good elasticity and tear strength and tensile strength, make your products not only beautiful, intricate product also avaliable and perfect, high temperature resistant even reach 350 centigrade and 50 centigrade below zero all keep flexible, and perfect simulation effects.
4.vulcanized at room temperature, easy operation

Operation referance:
As no two applications are quite the same, a small test application to determine if performance of this material suitability for your project is recommended.
1, Measuring & Mixing:before you begin, pre-mix Part A and Part B separately. After dispensing required amounts of Parts A and B into mixing container (1A:1B by weight or by volume), mix thoroughly making sure that you scrape the sides and bottom of the mixing container several times
2, Vacuum Degassing: After mixing parts A and B, vacuum material for 2-3 minutes at vacuum box, making sure that you leave enough room in container for product expansion.   
3, Pouring : brushing or injection or casting the completion of the deair bubble in addition to the silicone into the mold (before pouring, first coat in the mold detergent or mold release agent that is better demolding.)
 4, Curing: to complete the above steps, the silicone to cure for 2-12 hours fully cured depends on room temperature ; if heating 80-120 centigrade, can be completely cured within a few minutes.
 5, Tips: This product will not cure against surfaces containing sulfur, tin, even when sealed.If you are not sure if your clay contains sulfur, do a small compatibility test before using for an important project.

Shelf life
Under the room temperature is 25-30 centigrade, 12 months
Packing specification: this product is made from steel drum/plastic barrels packaging, specification is 1kg, 5 kg, 20 kg, 25 kg and 200 kg per drum.

Storage and transportation
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.In this case however, the properties required for the intended use must be checked for quality assurance reason

Sunny Guo
Dongugan hong lian organic silicon technology co.,ltd.
Tel/Fax: +86769 85073165-816
Mob: +86 18680616828 (wechat/whatsapp)
Skype: sunnyguo3972
Email: silicone@hongfengdg.cn
Web: www.hlsilicone.com
Store: hlglue.en.alibaba.com