platinum liquid silicone HL-9530 make artificial skin products

Description
Life casting liquid silicone rubber as a two-component heating vulcanization silicone rubber, part A and part B, the mixing ratio by weight or volume is 1:1 or 9:1, mainly be suitable for making molds and high quality silicone products application, approved the FDA ,ROHS, SGS, LFGB testing, can cure at room temperature or fast cure 15-30minutes under heating reach 80-120 Celsius. 

Parameter：

NOTE: All above  silicone color, mix ratio, cured hardness, pot life, cure time, packaging size etc all can customize according your requests, kindly note these, thanks

Application:

Life casting silicone rubber used in high-grade casting molding products, sex toys, silicone breast, silicone mask, silicone pasty, artificial penis, silicone vibrator, silicone O-ring, fake hip, simulation female lip, simulations organs, sexy doll, the simulation model of silicone prosthesis, silicone insole, foot care products, medical appliance, food mold, soap mold, candle mold, and many other silicone products, etc.

Characteristics:
1.With no deformation, high temperature resistant, resistant to acid and alkali, and no expansion characteristics
2.Low shrinkage ratio, less than 0.1% shrinkage
3.Good elasticity and tear strength and tensile strength, make your products not only beautiful, intricate product also avaliable and perfect, cured silicone can bear extreme temperature -60-350 Celsius still can keep flexible, and perfect simulation effects.
4.vulcanized at room temperature, easy operation

Operation referance:
As no two applications are quite the same, a small test application to determine if performance of this material suitability for your project is recommended.
1, Measuring & Mixing:before you begin, pre-mix Part A and Part B separately. After dispensing required amounts of Parts A and B into mixing container (1A:1B by weight or by volume), mix thoroughly making sure that you scrape the sides and bottom of the mixing container several times

2, Vacuum Degassing: After mixing parts A and B, vacuum material for 2-3 minutes at vacuum box, making sure that you leave enough room in container for product expansion.   

3, Pouring : brushing or injection or casting the completion of the deair bubble in addition to the silicone into the mold (before pouring, first coat in the mold detergent or mold release agent that is better demolding.)

 4, Curing: to complete the above steps, the silicone to cure for 2-12 hours fully cured depends on room temperature ; if heating 80-120 centigrade, can be completely cured within a few minutes.

 5, Tips: This product will not cure against surfaces containing sulfur, tin, even when sealed.If you are not sure if your clay contains sulfur, do a small compatibility test before using for an important project.

Shelf life
Under the room temperature is 25-30 centigrade, 12 months
Packing specification: this product is made from steel drum/plastic barrels packaging, specification is 500g, 1kg, 5 kg, 20 kg, 25 kg and 200 kg per barrel.

Storage and transportation
should be kept sealed in ventilation, cool, dry place, away from the children's place, prevent sun direct illuminate, belongs no dangerous goods of transportation.

Sunny Guo
Dongugan hong lian organic silicon technology co,.ltd
Tel/Fax:+86769 85075949
Mob:+86 18680616828 (wechat/whatsapp)
Skype:sunnyguo3972
Email:silicone@hongfengdg.cn
Web:www.hlsilicone.com
Store:hlglue.en.alibaba.com