Pad printing silicone HL-300 condensed cure liquid silicone rubber

Introduction:
Condensation Silica gel before curing is A, B component of the liquid separation of sub-installed at room temperature curing molding. Pad printing head is the pattern on the plate through the plastic head as a carrier, then the pattern on the steel plate in the toy products.

Application:
Mainly used for plastic toys, electroplating products, electronic toys, trademarks, ceramics, handicrafts, and other irregular patterns of printing stationery etc.

Character:
1, with excellent wear resistance, deformation, do not take the oil.
2, the quality of fine, no impurities, take oil particles, good elasticity, good oil, clear pattern printing
3, low viscosity, good mobility
4, low cost

Operation refer :
1,first clean the mold with detergent, clean the mold of the water dry or dry with an air gun, and coated with a layer of release agent or Vaseline
2, the AB component in accordance with the weight ratio of 100: 1.5 mixing evenly (using electronically more accurate)
3, the need to add silicone oil, the first silicone part A and silicone oil in accordance with the ratio of 10: 3 (silicone oil added according to customer requirements, but should not add too much) Silicone and silicone oil mixing evenly, according to the proportion of 100: 1.5 by adding B curing Mix again and stir well.
4, the silica gel will be placed evenly vacuum in addition to vacuum in the bubble (no bubbles can be filled with silicone containers do not need to fill, so as not to vacuum when the silicone overflow container)
5, the vacuum is completed, the mold will be poured into the mold to wait for room temperature (room temperature for 2-12 hours to fully cure)
6, will be completely cured silicone can be stripped

Storage:
This product should be stored in a ventilated, cool and dry place. It is not dangerous goods and can be transported as non-dangerous goods.

Packing:
A / B series standard package is 1 kg / 5 kg / 25 kg / 200kg per barrel

Note:
Hardness, color, curing time all can be adjusted according to customer requirements

Sunny Guo
Dongugan hong lian organic silicon technology co.,ltd.
Tel/Fax:+86769 85075949
Mob:+86 18680616828 (wechat/whatsapp)
Skype:sunnyguo3972
Email:silicone@hongfengdg.cn
Web:www.hlsilicone.com
Store:hlglue.en.alibaba.com