Food grade mold silicone
Current location:Products >> Food grade mold silicone >> View Contents
    Casting silicone food mold liquid silicone HL-8715
  • Categories:Food grade mold silicone
Detailed

Casting silicone food mold liquid silicone rubber HL-8715 platinum cure silicone 2 component liquid rubber

 

 

Description:
liquid silicone rubber as a two-component heating vulcanization silicone rubber, part A and part B, the mixing ratio by weight or volume is 1:1 or 9:1, mainly be suitable for making molds and high quality silicone products application, through the FDA ,ROHS, SGS, LFGB testing, can cure at room temperature or fast cure dozens of minutes under heating reach 80-120 centigrade. silicone color, hardness, pot life, cure time all can customized according your need.

 

 

Application:
food grade silicone rubber used in high-grade casting molding products,cake molds, candy molds, chocolate molds, sugar molds, edible cake decoration molds, butter shape molds, ice cream molds, soap molds, candle molds, resin molds, polyresin mold, polyurethane molds, craft molds, bake molds, silicone O-ring, medical appliance, food mold, and many other silicone products, etc

 

 

Parameter:

Items

 

NO.

HL-8715

Appearance

pink (custom)

Viscosity  (Pa.S)

20000+/-2000

     Mix ratio

                                        1:1 or 10:1 (by weight)

Density  (g/cm^3)

1.18

Hardness (shore A°)

15

Temperature resistance (℃)

-60+350

Elongation (%)

550

Tensile-strength (KN/m)

25

Condition of cure

A/B component according 1:1 mix ratio by weight, if silicone sheet size  150mm * 150mm * 2mm, silicone will cure about 7 minutes when 150 ℃

Note: all silicone color, mix ratio, viscosity, cured hardness, work time, cure time etc all can customize according your requests.

 

 

Characteristics:
1. Food grade, non-toxic, non-smell
2. Safety touch with skin or food
3. Good anti-aging, low shrinkage
4. High or low temperature resistant range -60-350 centigrade
5. Excellent flexible, low shrinkage
6. High duplication times

 

 

Operation referance:
As no two applications are quite the same, a small test application to determine if performance of this material suitability for your project is recommended.
1, Measuring & Mixing:before you begin, pre-mix Part A and Part B separately. After dispensing required amounts of Parts A and B into mixing container (1A:1B by weight or by volume), mix thoroughly making sure that you scrape the sides and bottom of the mixing container several times
2, Vacuum Degassing: After mixing parts A and B, vacuum material for 2-3 minutes at vacuum box, making sure that you leave enough room in container for product expansion.
3, Pouring : brushing or injection or casting the completion of the deair bubble in addition to the silicone into the mold (before pouring, first cast in the mold detergent or mold release agent that is better demolding.)
4, Curing: to complete the above steps, the silicone to cure for 2-12 hours fully cured depends on room temperature ; if heating 80-120 centigrade, can be completely cured within a few minutes.
5, Tips: This product will not cure against surfaces containing sulfur, tin, even when sealed.If you are not sure if your clay contains sulfur, do a small compatibility test before using for an important project.

 

 

Shelf life:
Under the room temperature is 25-30 centigrade, 12 months
Packing specification: this product is made from steel drum/plastic barrels packaging, specification is 1kg, 5kg, 20kg, 25kg and 200kg

 

 

Storage and transportation:
should be kept sealed in ventilation, cool, dry place, away from the children's place, prevent sun direct illuminate, belongs no dangerous goods.

 

 

Sunny Guo
Dongugan hong lian organic silicon technology co.,ltd.
Tel/Fax:+86769 85075949
Mob:+86 18680616828 (wechat/whatsapp)
Skype:sunnyguo3972
Email:silicone@hongfengdg.cn
Web:www.hlsilicone.com
Store:hlglue.en.alibaba.com