AB component manual soap mold silicone HL-8605 platinum cure liquid silicone rubber food grade silicone
Application:
food grade silicone rubber used in high-grade casting molding products,cake molds, candy molds, chocolate molds, sugar molds, edible cake decoration molds, butter shape molds, ice cream molds, soap molds, candle molds, resin molds, polyresin mold, polyurethane molds, craft molds, bake molds, silicone O-ring, medical appliance, food mold, and many other silicone products, etc
Parameter:
Items |
|
NO. | HL-8605 |
Appearance | translucence (custom) |
Viscosity (Pa.S) | 28000+/-1000 |
Density (g/cm^3) | 1.1 |
Hardness (shore A°) | 25+/-2 (0-60A custom) |
temperature resistance (℃) | -60+350 |
Elongation (%) | 500 |
Tensile-strength (KN/m) | 35 |
Condition of cure | A/B component according1:1 mix ratio by weight, refer thickness 150mm * 150mm * 2mm, silicone will cure about 7mins when 150℃ |
Description:
liquid silicone rubber as a two-component heating vulcanization silicone rubber, part A and part B, the mixing ratio by weight or volume is 1:1 or 9:1, mainly be suitable for making molds and high quality silicone products application, through the FDA ,ROHS, SGS, LFGB testing, can cure at room temperature or fast cure dozens of minutes under heating reach 80-120 centigrade. silicone color, hardness, pot life, cure time all can customized according your need.
Characteristics:
1. Food grade, non-toxic, non-smell
2. Safety touch with skin or food
3. Good anti-aging, low shrinkage
4. High or low temperature resistant range -60-350 centigrade
5. Excellent flexible, low shrinkage
6. High Duplication Times
Operation referance:
As no two applications are quite the same, a small test application to determine if performance of this material suitability for your project is recommended.
1, Measuring & Mixing:before you begin, pre-mix Part A and Part B separately. After dispensing required amounts of Parts A and B into mixing container (1A:1B by weight or by volume), mix thoroughly making sure that you scrape the sides and bottom of the mixing container several times
2, Vacuum Degassing: After mixing parts A and B, vacuum material for 2-3 minutes at vacuum box, making sure that you leave enough room in container for product expansion.
3, Pouring : brushing or injection or casting the completion of the deair bubble in addition to the silicone into the mold (before pouring, first cast in the mold detergent or mold release agent that is better demolding.)
4, Curing: to complete the above steps, the silicone to cure for 2-12 hours fully cured depends on room temperature ; if heating 80-120 centigrade, can be completely cured within a few minutes.
5, Tips: This product will not cure against surfaces containing sulfur, tin, even when sealed.If you are not sure if your clay contains sulfur, do a small compatibility test before using for an important project.
Shelf life
Under the room temperature is 25-30 centigrade, 12 months
Packing specification: this product is made from steel drum/plastic barrels packaging, specification is 1kg, 5kg, 20kg, 25kg and 200kg
Storage and transportation:
should be kept sealed in ventilation, cool, dry place, away from the children's place, prevent sun direct illuminate, belongs no dangerous goods.
Sunny Guo
Dongugan hong lian organic silicon technology co.,ltd.
Tel/Fax:+86769 85075949
Mob:+86 18680616828 (wechat/whatsapp)
Skype:sunnyguo3972
Email:silicone@hongfengdg.cn
Web:www.hlsilicone.com
Store:hlglue.en.alibaba.com
【Next】:FDA food grade liquid silicone HL - 8505