Cloth art silicone
Current location:Products >> Cloth art silicone >> View Contents
    make cloth trademark liquid silicone rubber HL-770
  • Categories:Cloth art silicone
Detailed

High transparent trademark liquid silicone rubber HL-770 make garment trademark good adhesive



Description:
trademark liquid silicone rubber as a two-component heating vulcanization silicone rubber, part A and part B, the mixing ratio by weight or volume is 1:1 or 9:1, belongs platinum cure liquid silicone rubber, mainly be suitable for brushable,cloth coating, screen printing, hot pressing, embossing cloth, tradmarks etc high quality productthrough the FDA ,ROHS, SGS, LFGB testing, can cure at room temperature or fast cure dozens of secs under heating reach 120-180 centigrade. silicone color, hardness, pot life, cure time all can customized according your need.



Parameter:

Items

 

NO.

HL - 770

Appearance

transparent

Viscosity     (Pa.S)

* (customize) 

Density   (g/cm^3)

1.18

Hardness  (shore  A°)

                             35 ±2 (customize)

High temperature resistance  (℃)

-60+350

Elongation  (%)

≥500

Tensile-strength (KN/m)

≥24

Condition of cure

silicone can cure 15-30s when temperature reach 120-150 centigrade, can customize also



Characteristics:
1.With no deformation, high temperature resistant, resistant to acid and alkali, and no expansion characteristics
2.Low shrinkage ratio, less than 0.1% shrinkage
3.Good elasticity, tear strength, tensile strength, make your products not only beautiful, but also can make the intricate product, high temperature resistant even reach 350 centigrade and 50 centigrade below zero all have no problem, the cured silicone still keep soft, not brittle, and perfect simulation effects.
4.vulcanized at room temperature, easy operation



Referance instruction:
As no two applications are quite the same, a small test application to determine if performance of this material suitability for your project is recommended.
1. get part A and part B by weight 9: 1 or 1: 1 mixing evenly (use of electronic scale more accurate)
2. then place the stired silicone into vacuum machine, the vacuum exhaust the bubbles of silicone till no bubbles can stop need about 5 mins.
3. Place the cloth on the male mold and apply the silicone to the cloth evenly (the thickness according products requirements) and then cover the other layer cloth on it, last press the female mold and heating
4. after finished all above steps, the silicone rubber can cure about 2-24hrs at room temperature; heating 180 degrees, can be fully cured within 15-30sec.
5. Tips: This product will not cure against surfaces containing sulfur, tin, even when sealed.If you are not sure if your clay contains sulfur, do a small compatibility test before using for an important project.



Shelf life
Under the room temperature is 25-30 centigrade, 12 months
Packing specification: this product is made from steel drum/plastic barrels packaging, specification is 5 kg, 20 kg, 25 kg and 200 kg



Storage and transportation
should be kept sealed in ventilation, cool, dry place, away from the children's place, prevent sun direct illuminate, belongs no dangerous goods of transportation.

 

 

Sunny Guo
Dongugan hong lian organic silicon technology co.,ltd.
Tel/Fax:+86769 85075949
Mob:+86 18680616828 (wechat/whatsapp)
Skype:sunnyguo3972
Email:silicone@hongfengdg.cn
Web:www.hlsilicone.com
Store:hlglue.en.alibaba.com