Depending on the product, adding different amount of silicone oil or don't add, because the silicone oil can destroy the molecular weight of silica gel, cause less double mould;

　　1. The amount of silicone oil to add to grasp (no more than 5%), silicone oil too much will cause die less silicone products, poor tensile and tear strength decreased, salinity tolerance, not resistant to aging degradation phenomenon.

　　2. Mold silicone and curing agent to stir well, prevent solidification uneven, resulting in the decrease of the quality of the product.

　　3. The silicone mold production to add detergent in the mold before, vaseline or release agent, pay attention to when to apply evenly.To copy product or model for grinding or polishing, prevent to silicone rubber product surface is not smooth, not beautiful.

　　4. Participate in the reaction of colloid prior to vacuum or bubble processing, processing time shoulds not be too long, about 2-3 minutes, to prevent solidification uneven, not beautiful, the phenomenon such as the decrease of the quality of the product.

　　Dongguang Honglian remind notice:

　　Liquid silicone, silicone raw materials storage for 6 months at room temperature, the water in the using process, impurities, condensation type silicon rubber of organotin catalyst, acid, alkali and other organic sulfur, phosphorus, nitrogen, which may affect the adhesive curing, when using can not with these impurities.