Silicone mold work ready, in die or die of gypsum products coated with vaseline, sprayed on cargo release agent, smooth product requirements with a clean vaseline on pure cotton cloth evenly coated in the die, die 30 minutes to make a full absorption of vaseline, again with a clean, pure cotton cloth wipe off the surface of the kind of requirements on the surface of light;And texture of the product as long as evenly coated with vaseline, according to the formula the silica gel. A, B component mixture.Allocation should be according to the direction of the irregular and minimize air mixed with glue, smooth the product on the first floor glue best when a vacuum, vacuum degree requirements maintain 7 to 8 seconds to 0.1 Mpa.

　　Choosing line is in does not affect the position of the product appearance, easy choice after grouting processing position, selecting the location of the mold itself is easy to dismantle, choose the position of the product is out of shape not easily;2, must not blindly increasing the dosage of the curing agent for cast production schedule, otherwise will reduce the service life of the silicone mold.